Semi-automatic can sealing machine:
Semi-automatic can sealing machine generally by hand - wrench can sealing machine, pneumatic can sealing machine, electric can sealing machine. Generally applicable to small business production, single production, small batch production plant.

Manual can closing machine:
Hand wrench can sealing machine is currently the most extensive semi-automatic can sealing machine, due to the mechanical quality stability, easy debugging and other advantages, by the majority of small factories, small workshops, shops and other units such as file mouth use.
This type of machine has a simple cover, and USES two knives for folding pressure sealing. The first knife is a folding edge knife, and the second knife is a bending fastening knife. It is generally used for sealing non-vacuum-filled cans.

Semi-automatic can sealing machine:
Put the jar with the lid on the bottom bracket.
Step on the top of the jar and press the mould with your foot.
3. Pull the handle so that the first knife and the second knife can tighten the lid edge quickly.
4. Put down the foot and output the finished product.

Pneumatic can sealing machine:
The automatic degree of this machine is slightly higher than that of the manual canister sealing machine. Use two cylinders instead of manual lever arm and pedal respectively.
Put the jar with the lid on the bottom bracket.
2. Press the foot switch and the bottom supporting cylinder to push the top of the jar against the upper pressing die.
3. Swing the arm cylinder to make the first knife and the second knife tighten the cover edge quickly.
4. Finished product output.

Electric can sealing machine:
The difference between electric can sealing machine and manual and pneumatic is that the first knife and the second knife are respectively installed on both sides of the pressure die.
Put the jar with the lid on the bottom bracket.
2. Step on the foot switch or the pot induction switch (different manufacturers, the practice is different), the base rest on the motor CAM drive the base rest to the top of the pot on the die.
3. Due to the effect of side swing arm CAM, the first knife first presses the edge of the cover, when the CAM rotates for half a week, the second knife swing arm begins to press.
4. Finished product output.
The above mentioned model is a popular semi-automatic tank sealing model in China. The average sealing speed of the model is between 15 and 30 cans/min. Because the cost is low, the technical content is not high, the quality is stable, therefore many individuals, the unit USES this kind of model. The disadvantage is not suitable for mass automated production lines.